§ 8.7. Chart I.

MINIMUM DIMENSIONAL REQUIREMENTS
AGRICULTURAL AND RESIDENTIAL DISTRICTS
SINGLE-FAMILY—TWO-FAMILY DWELLINGS

	District*	A	R-1	R-2	R-3	R-4	R-4D
1.	Single-family dwellings—Floor area:
	One story	1,200	1,600	1,400	1,200	1,100	1,200
	Minimum ground floor of multistory	1,000	1,200	1,100	1,000	900	1,000
2.	Two-family dwellings—Floor area:
	Each unit						1,000**
	Both units						2,000
	Minimum ground floor of multistory						1,000
3.	Lot width at building line—Single-family	150	110	100	90	75	100
	Lot width at building line—Two-family						100
4.	Minimum lot area (excludes area occupied by retention ponds);
	Single-family	40,000	20,000	17,500	15,000	13,600	15,000
	Two-family						15,000

 

		R/W	C/L	R/W	C/L	R/W	C/L	R/W	C/L	R/W	C/L	R/W	C/L
5.	Minimum front yard setback (in feet) (R/W = right-of-way; C/L = centerline of street). Minimum setback from R/W or C/L shall always be whichever is the greater distance.)
	Arterial streets	70	110	70	110	60	100	60	100	60	100	60	100
	Collector streets	65	95	60	90	50	80	40	70	40	70	40	70
	Minor streets	65	90	60	85	50	75	40	65	40	65	40	65
6.	Each side yard width	20		15		15		12		10		10
7.	Rear yard depth	50		40		40		35		25		25
8.	Building height limit (from lowest ground)	35		35		35		35		35		35
9.	Maximum percent lot coverage by buildings	10		15		20		20		20		20

 

 *All areas shown in square feet.

**Two family structures may have one unit with a floor area of not less than 600 square feet, provided the other unit floor area is not less than that required to provide the overall floor area required for the dwelling structure, excluding garages and storage areas.

***Dimensional requirements for the MPMUD, TCMU, and RMX districts are contained within the regulations pertaining to those districts.

( Ord. No. 04-03-2016 , § 1, 3-11-16)