§ 8.9. Chart III.

CHART III
MINIMUM DIMENSIONAL REQUIREMENTS
COMMERCIAL AND INDUSTRIAL DISTRICTS—PRINCIPAL
AND ACCESSORY STRUCTURES

		C-1	C-2 and C-3	C-4	C-T	M-1 and M-2
1.	Minimum district width*	150	125	125	125	150
2.	Minimum district area*	20,000	20,000	20,000	20,000	60,000
3.	Building height limits	60	60	60	60	40
4.	Maximum lot coverage by buildings	Subtract front, side and rear yard requirements, buffer, vehicular use area landscaping, off-street parking and drainage requirements to obtain building coverage.

 

5.	Minimum front yard setback (feet). (R/W = Right-of-way; C/L = Centerline of street)
	Minimum setback from R/W or C/L shall always be whichever is the greater distance.
		R/W	C/L	R/W	C/L	R/W	C/L	R/W	C/L	R/W	C/L
	Arterial streets	50	90	50	90	50	90	50	90	50	90
	Collector streets	50	80	50	80	50	80	50	80	50	80
	Minor streets	50	75	50	75	50	75	50	75	50	75

 

6.	Side street yard of corner lot**	40	40	40	40	40
7.	Side and rear yards when adjoining agricultural and all residential districts.	40	40	40	40	100
	Buffers—Side and rear yards***	25	25	10	10	25
8.	Side yard adjoining C-T district	40	40	15	10	40
	Rear yard adjoining C-T district	40	40	20	20	40
	(Buffers—Side and rear yards when adjoining C-T district***)	10	10	10	N/A	25
9.	Side yard—All commercial and industrial lots	10	10	10	N/A	10
	Rear yard—All commercial and industrial lots	20	20	20	N/A	20
	Provided yards do not adjoin C-T district
10.	Sidewalks	See article V, section 12.6—supplementary regulations

 

*Minimum district width and area does not apply when adjoining existing commercial or industrial zoned areas.

NOTE: Nothing herein shall relieve any person from complying with any other provision of this ordinance.