§ 10.6. Curb cut requirements and design standards.

Within any zoning district where the lowering or cutting away of any curbs for purposes of ingress and egress is required, such curb cut shall be subject to the following provisions:

1.

No more than one combined entrances and exits shall be allowed for any parcel of property, the frontage of which is less than 300 feet on any one street. Additional entrances or exits for parcels of property having a frontage in excess of 300 feet shall be permitted after showing the actual requirements of convenience and necessity and upon approval of the community development and general services department.

2.

No curb cut shall be located within 30 feet of any intersection.

3.

Maximum width of any curb cut including curb returns shall not exceed 30 feet except that a bona fide truck stop may not exceed the maximum figure as determined by the director of community development and general services department.

4.

Curb cuts shall be constructed so as to be at least five feet from any property line.

(Ord. of 4-28-2008)